VM FOLD 6

8322821

Year of commercialization: 2015

I have a problem

MY CONSOLE DOESN'T COME ON

1-At the back of the console Check that the console connections have been made correctly by referring to the user guide   2- Above the front foot Make sure the transformer connection has been properly made

 

MY CONSOLE REMAINS ON ZERO

 

- Check that one of the metal connector strips is not twisted

 

 

 

MY CONSOLE DOES NOT INDICATE THE RIGHT UNITS OF MEASUREMENT FOR THE DISTANCE

  1-Make sure the switch on the rear of the console is on \"VM\" for an exercise bike and \"VE\" for a cross trainer 2-Make sure the switch on the rear of the console is on \"Km\" for a display in kilometres and \"Mi\" for a display in miles 3-Press the \"RESET\" button to make the change  

 

I CAN'T FIT THE PEDALS

 The right pedal (R) and the left pedal (L) do not have the same screwing direction: 

 

                             R= clockwise                                                           L= anti-clockwise

 

THERE'S A CLICKING NOISE WITH EACH TURN OF THE PEDALS

 

Loosen by one turn and then really tighten the pedals

 

 

MY BIKE MAKES A NOISE

  1-Tighten all visible screws 2-Check the stabiliser runners   

 

MY BIKE ISN'T STABLE
THE PUSH BUTTON IS VERY STIFF

 

 

BROKEN OR MISSING PART

 

Look for the part number and click on 'NO’

 

 

MAINTENANCE

1. Unplug the adaptor after each use.

 

2. Clean with a soft, slightly damp cloth after each use.

 

3. Regularly check against the instructions that your bike is stable and that the screws are tight.

 

4. If you aren't going to use your bike for a while:

- remove the batteries

- don't leave your bike in direct sunlight or anywhere damp

Manual and software

HAUT DE PAGE